2012年第4期目录

时间：2019-06-04    阅读：470

基于ANSYS旋转机械模块的转子动力特性分析··························· 冀  成，杨兆建，庞新宇，等(1)

基于CATIA二次开发的ITER杜瓦参数化设计研究········································ 金  薇，张  晔(4)

激光深熔焊熔池形成过程的数值模拟························································· 霍厚志，王  宏(6)

基于ADAMS的JB30/15冲击试验机运动仿真··································· 郑雪飞，唐德文，唐永辉(9)

一种500CC全地形车车架模态分析·························································· 仇高贺，白  斌(11)

滤波减速器轮齿齿形修形及分析············································ 杜海伟，王家序，肖  科，等(14)

基于LM3S1138的触摸屏系统设计··············································· 廉小龙，夏路易，胡  旭(17)

车辆运输半挂车车架有限元分析与优化········································· 吴华杰，秦永法，陈师栋(20)

神经网络在火药气体作用系数计算中的应用···································· 柯  彪，贾  强，高跃飞(23)

基于虚拟样机ADAMS的钢丝绳建模及仿真······························ 郑世山，张亮有，符敢为，等(26)

气送混凝土的流态分析与仿真····················································· 贾海深，李文英，肖文远(29)

水冷式冷渣机单根管路冷却性能分析······················································· 李  坤，李文斌(32)

超级电容辅助发动机启动系统建模····································································· 梁  堃(35)

基于NX WAVE和NASTRAN的挖掘机铲斗提梁的分析优化··········· 谭  彬，仝雷强，李永亮，等(38)

基于LabVIEW的转向器检测系统设计与实现············································· 陈松林，李  霆(40)

多孔介质单元区域的流场模拟及分析······················································· 张国庆，刘汉涛(42)

三辊轧制过程建模与模拟·························································· 张  冲，郝润元，陈俊杰(44)

基于J2EE标准的社保统一征缴MIS的设计··························································· 徐慧琼(46)

基于UG和ANSYS的墙角托架有限元分析······························· 花广如，芦  信，王海洋，等(48)

基于gec2410的远程网络监控系统的移植······························································ 秦忠凯(50)

基于UG的叶轮5轴数控铣削编程与加工······························································ 曾小梅(52)

梅钢1420平整机组湿平整过程喷淋流场的计算·························· 张青树，李秀军，武利好，等(55)

离心式喷嘴雾化特性的数值模拟········································································ 王英霞(58)

基于ANSYS的双齿辊破碎机辊齿优化分析······························· 高志鹏，王守信，宋战胜，等(60)

基于AMESim的液压位置伺服系统仿真···················································· 刘丽霞，武建新(62)

FESTO模块化生产系统的柔性化开发······················································· 茹  君，李文斌(65)

圆柱直齿齿轮简化模型的弯曲振动特性研究···································· 郭振武，吕  明，王时英(67)

钢管热扩口力的计算及其数值模拟··············································· 高  炯，郝润元，陈俊杰(70)

利用计算机解决力学问题················································································· 曾艳玲(72)

浅谈喷嘴进口压力对扩散角的影响·························································· 马丽娅，刘英林(75)

基于直接序列的LDPC信道编码及译码研究···································· 张银蒲，赵庆利，窦桂华(76)

挂车桥制动器底板孔加工专用组合机床的设计······················································· 王永辉(79)

双向驾驶防爆无轨胶轮车的研发与改进····················································· 张安辉，李俊仁(81)

驻车/行驶发电机结构设计····································································· 周红薇，徐剑萍(83)

基于轴向电机泵的被动永磁轴承设计与力学分析······························ 樊江艺，曾  励，张  强(85)

铝棒热剪及优化剪切开发与运用········································································ 郭强华(87)

10档变速器操纵系统的设计············································································· 殷明贵(90)

一种理想风机叶片翼型的设计方法·························································· 崔  研，闫  磊(92)

冷却方式对20Mn2SiVB钢显微组织和性能的影响····························· 张志俊，纪  花，邵文明(95)

应力大小对不锈钢焊接接头耐蚀性的影响····························································· 许  毅(97)

马氏体不锈钢的研究与应用··································································· 袁彩梅，王国强(99)

大尺寸轴毂的过盈连接与电磁感应热套法···························································· 孙培明(102)

薄壁气缸体零件的夹具设计································································· 刘  峻，朱敏红(105)

大型护环双冲头复合冲挤热成形工艺研究····································· 禹兴胜，田继红，郭会光(107)

某型摩托车箱盖涂装缺陷及前处理工艺试验分析········································ 陈卫东，李穗平(109)

光整光饰技术在滚动轴承加工制造中的应用························································· 张宏友(111)

梅钢1420平整机组辊型及轧制工艺参数优化············································· 郑均干，张青树(113)

高强钢焊接变形预防控制工艺··················································· 孔  森，刘翠荣，牛兴海(115)

硬盘外壳平面度检测系统的研究与开发········································ 何鸿鲲，唐瑞尹，李建伟(118)

锚杆轴力无损检测装置的研究与设计································································· 刘青康(120)

基于单片机的鞋底尺寸测量装置的设计······························································ 段晓平(122)

数控机床位置控制中非线性PID控制器的设计·································· 申永，赵国勇，安红静(124)

基于伺服电机和PLC的工作台运动控制·································· 刘媛媛，张如萍，张正和，等(126)

五泵变频循环软启恒压供水系统设计································································· 万  江(129)

滑模控制在电液伺服力控系统中的应用与研究······················································ 彭  昌(132)

PLC对机械手的定位控制···································································· 王  亮，李  虹(135)

PLC在转炉煤气回收控制系统中的设计与应用································ 肖有洋，刘  征，陈春桥(138)

基于PLC的电动机控制系统设计······································································ 袁连余(140)

雨水样品采集分配器的伺服控制设计································································· 唐谭荣(142)

基于模糊预测控制的回转窑温度控制······················································ 周  颖，张宇宁(144)

门式起重机减摆PID控制系统的研究··········································· 杨会珍，李  虹，赵  勇(146)

DS18B20数字式温度测量装置的研究······················································ 张宇宁，周  颖(149)

基于神经网络干扰观测器的终端滑模飞行控制设计················································ 杨立一(152)

架空导线覆冰状况自动检测系统···························································· 贾敏智，胡亮亮(155)

基于AB 1756系列PLC的高炉煤气净化系统·································· 朱建会，徐  震，刘  征(158)

复合模糊PID在温度滞后控制系统中的应用························································· 令朝霞(160)

基于椭球拟合的三轴磁传感器快速标定补偿方法······················· 张  樨，李  杰，蒋  窍，等(163)

电液伺服系统的清洁度控制············································································ 石  军(166)

MAXIMO系统与DCS融合应用分析······················································· 郭海涛，闫春颖(168)

一种新的拉线式位移传感器的设计及其应用·············································· 王  兴，戚景观(171)

PWM智能电源网侧三相电抗器的工程设计··············································· 赵  彦，李铁鹰(174)

龙门铣床横梁和滑枕的液压自动平衡系统研究··········································· 喻悠然，王野牧(177)

浅谈液压系统污染控制的方法与对策······················································ 王  辉，周新丽(180)

油液分析在船用动力系统状态监测中的应用·············································· 陈学峰，任  丹(182)

烫金机数控技术的改造和分析·········································································· 潘启军(184)

汽车自动变速器故障诊断方法的研究································································· 张红英(186)

SINAMICS S120变频器在转炉传动上的应用································· 刘  征，姜玉春，许文菊(188)

光电互感器的研究应用·················································································· 张学一(190)

电厂高压变频器运行中的问题及解决方法················································ 段建慜，张少萍(192)

径向磁悬浮轴承的功耗分析················································ 孙兴伟，刘万涛，孙  凤，等(194)

轮式装载机动臂举升油缸缓冲特性探讨······························································ 马红欣(196)

基于CC2430的ZigBee无线通信模块设计················································ 郝永亮，杨铁梅(198)

陶瓷片密封水嘴产品常见质量问题的分析································ 黄旺森，蒋  武，吴  敏，等(201)

边部遮挡功能在热轧带钢轧制中的应用······························································ 康  伟(203)

盲管在液压系统中的减振降噪研究·············································· 刘天勋，霍电辉，林泽伟(205)

液压泵站机旁控制柜的设计································································· 闫  玫，高  源(207)

爆炸焊接的界面结合及成波机理研究现状····································· 刘士彬，刘翠荣，吴志生(210)

基于机械产品制造绿色加工工艺的分析与研究·························· 梅志敏，钟  欢，雷亚兰，等(212)

工程制图教学中哲学思维的培养与应用··················································· 伍平平，刘  林(214)

附件：